Specifications – Controlled Products Systems Group 9000-080 User Manual

Page 3

Advertising
background image

9000-065-F-9-10

1

16.5”

28”

19”

DoorKing, Inc. reserves the right to make changes in the products described in this manual without notice and without obligation of DoorKing, Inc. to notify any persons of any such
revisions or changes. Additionally, DoorKing, Inc. makes no representations or warranties with respect to this manual. This manual is copyrighted, all rights reserved. No portion of this
manual may be copied, reproduced, translated, or reduced to any electronic medium without prior written consent from DoorKing, Inc.

WARNING

MOVING GATE CAN CAUSE

Persons are to keep clear! The gate is capable of
being moved without prior warning.
Do not let children operate the gate or play in the
gate area.
This entrance is for vehicles only. Pedestrians
must use a separate entrance.
Persons are to read the owner’s manual and
safety instructions.

For gate operator using Type D entrapment
protection, an automatic closing device (such as a
timer, loop sensor or similar device) shall not be
employed.

SERIOUS INJURY OR DEATH

CLASS

CERTIFIED TO

CAN/CSA C22.2 NO. 247

CONFORMS TO

ANSI/UL-325

VEHICULAR GATE OPERATOR

HP

53382

MODEL

SERIAL

VOLTS

PHASE

AMPS

60 Hz

MAX GATE LOAD

DoorKing, Inc., Inglewood, CA

SPECIFICATIONS

Gate Frame

7.75”

4” Minimum

Chain Height:
Idler wheels in
top position.

Concrete Pad

Concrete Pad

Class of Operation

UL 325 Class I, II, III, IV

Type of Gate

Vehicular Slide Gates Only

Drive Sprocket Size

#40 Chain

Entrapment Protection

Primary - Inherent entrapment sensing system (Type A)

Secondary - Provision for connection of photo sensors (Type B1)

and/or reversing edges (Type B2).

Amp

Horsepower - Volts - Phase

Model #

Max Gate Weight

Installed Level

Max Gate Length

Installed Level

1/2 HP - 115 VAC 1-Phase

1/2 HP - 208 VAC 1-Phase

1/2 HP - 230 VAC 1-Phase

1/2 HP - 460 VAC 1-Phase

1 HP - 115 VAC 1-Phase

1 HP - 208 VAC 1-Phase

1 HP - 230 VAC 1-Phase

Secondary Operator
1/2 HP - 115 VAC 1-Phase

Secondary Operator
1 HP - 115 VAC 1-Phase

9000-080

9000-082

9000-083

9000-084

9000-085

9000-087

9000-088

9000-081

9000-086

1,000 Lbs.

1,000 Lbs.

1,000 Lbs.

1,000 Lbs.

1,500 Lbs.

1,500 Lbs.

1,500 Lbs.

1,000 Lbs.

1,500 Lbs.

35 Ft.

35 Ft.

35 Ft.

35 Ft.

35 Ft.

35 Ft.

35 Ft.

35 Ft.

35 Ft.

Cycles Per Hour

60

60

60

60

60

60

60

60

60

Speed

1 Ft/Sec

1 Ft/Sec

1 Ft/Sec

1 Ft/Sec

1 Ft/Sec

1 Ft/Sec

1 Ft/Sec

1 Ft/Sec

1 Ft/Sec

5.4

2.7

2.7

1.35

9.7

4.9

4.9

5.4

9.7

Gate Installed Level

Use this manual for the Model 9000 operators with circuit board 4405-010 Rev D or higher ONLY.

Advertising
This manual is related to the following products: