Controlled Products Systems Group 9000-080 - Manual (Page 15)

9000-065-F-9-10 13
Top View
Additional hardware required. Endless idler assembly (P/N 2600-818) and
additional chain #40 (P/N 2600-442 - 20 ft. per box) may be needed.
Rear Position with Concrete Pad
Hides the chain from outside the property looking in.
Rear Position with Post Mount Kit
Raises operator and allows different chain heights.
Idler Wheels and Chain Setup
• Set one chain Idler wheel at the center
and one in the bottom position.
• Set one chain Idler wheel at the top
and one in the center position.
Idler Wheels and Chain Setup
Endless
Idler
Additional hardware required. Post mount kit (P/N 9000-015). Endless idler assembly (P/N 2600-818)
and additional chain #40 (P/N 2600-442 - 20 ft. per box) may be needed.
See page 17 for
more information
about endless idlers.
A filler post or barrier may need to be installed between
the gate and wall area (See page 8 for more information).
See page 15 and the post mount
instruction sheet included with the kit for
more information about post installation.