Luminex xPONENT for MAGPIX - Manual (Page 106)

• System Shutdown- Use this routine to perform a pre-defined system shutdown.
• Alcohol Flush- Use this routine to run a single alcohol flush.
• Sanitize- Use this routine to run a sanitize command.
The commands for these routines display in the command list below the buttons.
FIGURE 45. Auto Maint Tab
Command - Displays the name of the current command, its well location, its status, and
information about the command. Only the current commands appear in the box.
Reagent - Displays the reagents and well locations necessary for the selected routine. You
can select kits for the routines from the Calibration Kit and Performance Verification Kit
lists.
Report - Opens the Reports tab, with the Performance Verification Reports selection
displayed in the Report list.
Import Kit - Opens the Import Calibration or Performance Kit dialog box. Select a kit and
click Open to import a kit.
Run - Initiates the selected routine.
Performing System Maintenance
93