Luminex xPONENT for MAGPIX - Manual (Page 87)

• Validate - Validates an entire selected row or cell in the Results table. Average rows or
cells cannot be selected. If you haven’t selected an item or the item you selected does not
need to be validated, a warning dialog box displays. Your xPONENT system administrator
must give you privileges to invalidate standards if you are using the Secure xPONENT
package.
• Invalidate - Invalidates an entire selected row or cell in the Results table. The selection
will turn red when invalidated. Select the same item and click Validate to remove the
invalidation status.
• Save - Saves the batch. This button only appears if a change was made to the batch.
• Analyze - Analyzes data that has been invalidated. This button only appears if you have
clicked Invalidate on a portion of the data, or if you have clicked Validate on an
invalidated portion of the data. This will analyze the data again with the invalidated
standard removed.
• Close - Closes the batch and reopens the Saved Batches tab.
Click the Results page, then open the Saved Batches tab. Click the batch name, then click
Open. The Results Settings, Log, and Sample Details tabs appear.
• Click the Results tab to view statistical information about the batch.
• Click the Log tab to view a log for the activity that occurred during acquisition of the
selected batch.
Click the Sample Details tab to view sample details for each sample in the batch. If you are
using the LIS package, click Transmit to transmit the data to the LIS.
Settings Tab
Use this tab to view the acquisition parameters of the selected saved batch and print the
batch settings report.
xPONENT for MAGPIX
74