Luminex xPONENT for MAGPIX - Manual (Page 73)

FIGURE 29. Samples Tab
This page contains the following tabs:
• Create Sample - Displays when the Create New Samples button is clicked.
• Edit Samples - Displays when the Details button is clicked.
These tabs are numbered because you must complete the steps on each tab sequentially.
For example, you must complete the Protocols tab before you can access the Stds & Ctrls
tab.
WARNING: Human and animal samples may contain biohazardous
infectious agents. Where exposure to potentially biohazardous
material—including aerosol—exists, follow appropriate biosafety
procedures and use personal protective equipment such as
gloves, gowns, laboratory coats, face shields, or mask and eye
protection. Use ventilation devices. Observe all local, state, and
federal biohazard handling regulations when disposing of
biohazardous waste material.
After you select a protocol, this tab displays the following:
Create New Samples - Opens the Create New Samples tab. This tab contains the following:
xPONENT for MAGPIX
60