Luminex xPONENT for MAGPIX - Manual (Page 83)

FIGURE 34. Filter Setup Dialog Box
This dialog box lets you choose the saved batch that you want to display in the Completed
Batches list, based on the options you select or clear in the following check boxes:
• Batch Name
• Protocol
• Batch Status
• Lot ID
• Kit ID
• Analyte
• Sample ID
• First Name
• Last Name
• User ID
• Date
Reset - Clears all check boxes.
OK - Closes the dialog box and applies any changes you made.
Cancel - Closes the dialog box and cancels any changes you made.
Save Prtcl - Saves the protocol and kit information for the selected batch.
Plate Layout - Opens the Report dialog box, which includes the Batch Plate Layout
Report. Confirm that the plate layout conforms to your specific assay instructions.
Approve - Opens the Batch Approval Confirmation dialog box to approve the selected
batch. Only approved batches can be transmitted to the LIS. If your software is licensed for
LIS use, you can transmit batches to the LIS from the Sample Results tab. Once you have
approved a batch, the status of the batch changes to Approved in the Completed Batches
list.
Exp Results - Opens the Save As dialog box to choose an export destination for the CSV
file containing your results.
xPONENT for MAGPIX
70