Diamond Products SB - Manual (Page 14)

Safe and efficient operation SB Wire Sawing System
Page 14 SB_0107_e.mif
 6DIH DQG HIILFLHQW RSHUDWLRQ
To achieve a safe and efficient operation, we
recommend that you proceed as follows:
7DVN 5HIHUHQFH
Read safety instructions See “1.2, Inherent dangers of wire saws” on Page 6
Transport machine See “15.1, Transport” on Page 42
Set up the SB machine See “7, Applicational advice” on Page 18
Sequence of cuts See “7, Applicational advice” on Page 18
Establish wire lengths See “2.8, Wire lengths” on Page 13
Connect SB See “8, Connection of hydraulics and water” on
Page 22
Connect wire See “9.4, Connect wire” on Page 31
Insert wire See “10.1, Insert wire, general.” on Page 33
Store wire See “11.1, Store wire, 1st step” on Page 35
Determine wire cutting speed See “2.7, Wire cutting speed” on Page 12
Run up wire saw See “12, Run up wire saw” on Page 36
Interrupt cut See “12.6, Interruption of cut” on Page 38
Stop work See “12.8, Terminate operation” on Page 38
Maintenance See “14.1, Maintenance table” on Page 41
Putting out of operation and storage See “15.2, Putting out of operation, storage” on
Page 42