Diamond Products SB - Manual (Page 34)

Insert wire SB Wire Sawing System
Page 34 SB_0107_e.mif
 ,QVHUW ZLUH 
VW
VWHS
1. Move rocker together with drive pulleys
downwards (1a)
2. Insert wire in running direction over the left-hand
swivelling pulley (1b)
3. Place wire around upper deflection pulley (2)
4. Place wire around lower deflection pulley (3)
5. Guide wire upwards to the drive pulleys (4)
 ,QVHUW ZLUH 
QG
VWHS
1. Place wire around the first drive pulley (5)
2. Place wire around the first deflection pulley (6)
3. Place wire around the second drive pulley (7)
 ,QVHUW ZLUH 
UG
VWHS
1. Place wire 3 times around pulleys (8)
2. After third drive pulley guide wire directly downwards
towards the right hand deflection pulley (9)
3. Guide wire outwards with right-hand deflection
pulley (10)
 ,QVHUW ZLUH 
WK
VWHS
1. Latch roller guide (R) for the first storage stage into
the final position on the left (11)