Diamond Products SB - Manual (Page 36)

Run up wire saw SB Wire Sawing System
Page 36 SB_0107_e.mif
 5XQ XS ZLUH VDZ
To achieve a safe and efficient operation, we
recommend that you proceed as follows:
Before any work is carried out on
the SB the plug on the drive - if
connected - must be withdrawn.
7DVN 5HIHUHQFH
Read safety instructions See “1.2, Inherent dangers of chain saws” on Page 6
Pull wire through by hand See “12.1, Pull wire through by hand” on Page 37
Switch on drive unit See “12.2, Switch on drive unit” on Page 37
Preset the feed See “12.3, Presetting the feed” on Page 37
Set up water See “6, Water” on Page 17
Let wire run See “12.4, Letting the wire run” on Page 37
Operation See “12.5, Operation” on Page 38
Interruption of cut See “12.6, Interruption of cut” on Page 38
End of cut See “12.7, End of cut” on Page 38
Terminate operation See “12.8, Terminate operation” on Page 38