Diamond Products SB - Manual (Page 7)

SB Wire Sawing System Safety instructions
SB_0107_e.mif Page 7
3URWHFWLYH PHDVXUHV FRXOG EH
l Wood (min. 20mm)
l Sheet metal (aluminium, min. 3 mm,
steel, min. 2 mm)
7KH FRVW RI VDIHW\
Safety never comes free. The setting up of
wire sawing operations must always include
the setting up of all the protective equipment
as described above. The time and material for
these installations must be taken into account
when preparing quotations for the customers.
 ,QWHQGHG SXUSRVH
The intended purpose of the wire saw is the
sawing of the materials described above with
an 11 mm diameter diamond wire (sintered)
and 10 mm (electro-plated). Any other use can
lead to dangers and will exclude any possibility
of liability being accepted by
HYDROSTRESS / TYROLIT.
&XWRXW SDUWV
These can be very heavy:
Example:
A one metre square cube weighs about 2.5
tonnes.
Make sure that such parts do not fall outside
the restricted zone.
'ULYHV DQG DFFHVVRULHV
Only use the machine with the recommended
drives and their respective accessories.