Diamond Products SB - Manual (Page 16)

Control elements SB Wire Sawing System
Page 16 SB_0107_e.mif
 &RQWURO HOHPHQWV
:DWHU WDS
Water tap (2) for regulating the flushing of the
drive pulleys
/RFNLQJ VFUHZV IRU WKH VZLYHOOLQJ SXOOH\V
5ROOHU JXLGHV
The roller guide (8a) has 4 latched positions
and guides the wire to the correct storage
pulley.
During cutting work the locking screws on
the swivelling pulleys must be tight.
During cutting work the locking screws for
the roller guides (8b) must be tight.
Before servicing or adjusting the
SB the plug on the connected
drive unit must be pulled out.