Diamond Products SB - Manual (Page 18)

Applicational advice SB Wire Sawing System
Page 18 SB_0107_e.mif
 $SSOLFDWLRQDO DGYLFH
 6HWWLQJ XS WKH 6%
Usually the SB is set up at a certain distance
from the structure (indirect erection), and the
wire is guided into the cut with the universal
trestle.
A: Horizontal cut
B: Vertical cut, flush
The SB is usually set up in a standing (vertical)
position. However if the space is limited it can
also be placed horizontally.