Nova-Tech DO 6+ - Manual (Page 30)

Instruction Manual DO 6+
- 24 -
HOLD
ENTER
HOLD
ENTER
HOLD
ENTER
HOLD
ENTER
“FACT” displays for
1.5 seconds
“HI.mV” displays
for 1.5 seconds
“LO.mV” displays
for 1.5 seconds
%
Viewing of the offset
percentage adjustment will be
available only if set up menu is
selected from the DO %
Saturation or the Temperature
Mode. Otherwise, this menu
will be skipped.
“OFS” displays for
1.5 seconds
5.6 Automatic Shut Off (AtO.4)
Use this feature to conserve batteries. When active, the
meter will automatically shut off 20 minutes after the last
key press.
1) From the setup menu, press ▲▼ to select “AtO.4”.
2) Press HOLD/ENTER to enter the menu.
3) Use ▲▼ to select YES (activate automatic off) or
NO (activate automatic off).
4) Press HOLD/ENTER to confirm.
5) Press CAL to return to measurement mode.
HOLD
ENTER