Turning an analog output over-range feature on/off – Teledyne GFC-7001E - Trace CO Analyzer User Manual

Page 142

Advertising
background image

Advanced Features

Model GFC7001E Carbon Dioxide Analyzer

Teledyne Analytical Instruments

142

7.4.4. TURNING AN ANALOG OUTPUT OVER-RANGE FEATURE ON/OFF

In its default configuration, a ± 5% over-range is available on each of the GFC 7001E/EM Analyzer’s analog
outputs. This over-range can be disabled if your recording device is sensitive to excess voltage or current.

To turn the over-range feature on or off, select the ANALOG I/O CONFIGURATION submenu (see Figure 7-4)
then press:

Advertising
See also other documents in the category Teledyne Equipment: