Teledyne GFC-7001E - Trace CO Analyzer - Manual (Page 31)

Getting Started Model GFC7001E Carbon Dioxide Analyzer
Teledyne Analytical Instruments 31
3. GETTING STARTED
3.1. GFC 7001E/EM ANALYZER LAYOUT
Figure 3-1: Front Panel Layout
Table 3-1: Front Panel Nomenclature
Name Significance
Mode Field Displays the name of the analyzer’s current operating mode.
Message Field
Displays a variety of informational messages such as warning messages, operational data, test function
values and response messages during interactive tasks.
Concentration
Field Displays the actual concentration of the sample gas currently being measured by the analyzer in the
currently selected units of measure.
Keypad
Definition Field
Displays dynamic, context sensitive definitions for the row of keys just below the display.
STATUS LED’s
Name Color State Definition
SAMPLE Green
Off
On
Blinking Unit is not operating in sample mode, iDAS is disabled.
Sample Mode active; Front Panel Display being updated; iDAS data being stored.
Unit is operating in sample mode, front panel display being updated, iDAS hold-off mode
is ON, iDAS disabled
CAL Yellow
Off
On
Blinking Auto Cal disabled
Auto Cal enabled
Unit is in calibration mode
FAULT Red
Off
Blinking No warnings exist
Warnings exist