Teledyne GFC-7001E - Trace CO Analyzer - Manual (Page 178)

Remote Operation Model GFC7001E Carbon Dioxide Analyzer
Teledyne Analytical Instruments 178
8.6.5. SETTING THE HESSEN PROTOCOL RESPONSE MODE
The Teledyne’s implementation of Hessen Protocol allows the user to choose one of several different modes of
response for the analyzer.
Table 8-7: Teledyne’s Hessen Protocol Response Modes
MODE ID MODE DESCRIPTION
CMD
This is the Default Setting. Reponses from the instrument are encoded as the traditional
command format. Style and format of responses depend on exact coding of the initiating
command.
BCC
Responses from the instrument are always delimited with <STX> (at the beginning of the
response, <ETX> (at the end of the response followed by a 2 digit Block Check Code
(checksum), regardless of the command encoding.
TEXT
Responses from the instrument are always delimited with <CR> at the beginning and the
end of the string, regardless of the command encoding.
To select a Hessen response mode, press: