Teledyne GFC-7001E - Trace CO Analyzer - Manual (Page 28)

Specifications Model GFC7001E Carbon Dioxide Analyzer
Teledyne Analytical Instruments 28
1 As defined by the USEPA 2 At constant temperature and pressure
2.2. EPA EQUIVALENCY DESIGNATION
Teledyne’s GFC 7001E Carbon Monoxide Analyzer is designated as Reference Method Number EQOA-0992-
087 as defined in 40 CFR Part 53, when operated under the following conditions:
 Range: Any range from 10 ppm to 50 ppm.
 Ambient temperature range of 10 to 40C.
 Line voltage range of 90 – 127 and 200 – 230 VAC, 50/60 Hz.
 Sample filter: Equipped with PTFE filter element in the internal filter assembly.
 Sample flow of 800  80 cm
3 /min at sea level.
 Internal sample pump.
 Software settings:
Dilution factor 1.0
AutoCal ON or OFF
Dynamic Zero ON or OFF
Dynamic Span OFF
Dual range ON or OFF
Auto range ON or OFF
Temp/Pres compensation ON
Under the designation, the analyzer may be operated with or without the following options:
 Rack mount with slides.
 Rack mount without slides, ears only.
 Zero/span valve options.
 Option 50A – Sample/Cal valves, or;
 Option 50B – Sample/Cal valves with span shutoff & flow control.
 Internal zero/span (IZS) option with either:
 Option 51A – Sample/Cal valves, or;
 Option 51C – Sample/Cal valves with span shutoff & flow control.
 Status outputs.
 Control inputs.
 RS-232 output.
 Ethernet output.
 4-20mA, isolated output.