Darex XPS-16 Operating Instructions User Manual
Page 119
Advertising
User Manual Page 27
1. Turn the machine on.
2. Push the check icon.
3. Push the tool icon.
Removing and Replacing Grind Motor Assembly
F1, 2 &3 only
4. Push the belt change icon.
5. The X-Axis will move into the belt change po-
sition and stop. Shut the machine off and dis-
connect power source.
6. Refer to
Grind Motor Belt Replacement
instruc-
tions and remove belt. See Section 24 Sche-
matics and Work Instructions page 29.
7. Unplug the motor connector wires.
Advertising