Darex XPS-16 Operating Instructions - Manual (Page 5)

5
Safety Instructions
FOR YOUR OWN SAFETY, READ INSTRUC-
TION MANUAL BEFORE OPERATING MA-
CHINE!
Caution:
RUNNING
Caution:
WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED TO PREVENT THE RISK OF
FIRE, ELECTRIC SHOCK AND PERSONAL INJURY, INCLUDING
THE FOLLOWING:
ALWAYS: Push the emergency stop button, unplug unit from
power supply and use a “LOCK OUT” “TAG OUT” procedure.
Maintenance" in this Instruction Manual.
sharpener is on. The rotating grinding wheel can cause injury.
instructions entitled “Replacing The Grinding Wheel”, in this
Instruction Manual.
accidents.
power tools in damp or wet locations, or expose them to rain.
rate for which it was designed.
job it was not designed for.
best and safest performance.
“OFF" position before plugging cord in to outlet or machine.
manual for recommended accessories. The use of improper
accessories may cause hazards.
guard or other part that is dama ged should be carefully checked
to assure that it will operate properly and perform its intended
function. Check for alignment of moving parts, binding of moving
parts, breakage of parts, mounting and any other conditions that
may affect its operation. A guard or other part that is damaged
should be properly repaired or replaced.
in good condition. When using an extension cord be sure to use
one heavy enough to carry the current the Drill Sharpener will
draw. An undersize cord will cause a drop in line voltage, resulting
in a loss of power and/or overheating.
grinding wheels suitable for speed of grinder
the operator’s ear is not over 60dB (A)
Safety Instructions
VALUE to which the arms are subjected to does not exceed
any tools have been removed from the sharpener before turning it on.
off.
2.5 m/s
DO NOT OPERATE MACHINE WITHOUT VACUUM SYSTEM
Airflow from vacuum cools grinding motor
Grinding dust inhaled/ingested can be harmful to your health
Grinding
particles will cause damage to th e internal components
WHEN MAINTENANCE IS PERFORMED ON SHARPENER
Follow instructions entitled “DAREX XPS-16
Never touch internal parts of the sharpener when the
Use caution when replacing the grinding wheel. Follow
KEEP GUARDS IN PLACE and in working order.
REMOVE WRENCHES and Adjusting Keys Always check to see that
KEEP WORK AREA CLEAN Cluttered areas and benches invite
DON'T USE IN DANGEROUS ENVIRONMENT Do not use
STORE EQUIPMENT in a safe place when not in use.
DON'T FORCE TOOL It will do the job better and safer at the
USE THE RIGHT TOOL Don’t force tool or attachment to do a
MAINTAIN TOOL WITH CARE Keep tools sharp and clean for
DISCONNECT TOOLS from the power supply before service or when changing accessories .
AVOID ACCIDENTAL STARTING Make sure switch is in the
USE RECOMMENDED ACCESSORIES Consult the owner's
CHECK FOR DAMAGED PARTS Before further use of the tool, a
NEVER LEAVE TOOL RUNNING UNATTENDED Turn power
USE PROPER EXTENSION CORD Make sure extension cord is
DO NOT USE DAMAGED OR UNSHAPED WHEELS Use
THE CONTINUOUS A-WEIGHTED sound pressure level at
THE WEIGHTED ROOT MEAN SQUARE ACCELERATION
Do not use in an area where children may be present.
safe distance from work area.
switches, or by removing starter keys.
RISK OF INJURY DUE TO ACCIDENTAL STARTING.
MAKE WORKSHOP KID PROOF with padlocks, master
neckties, rings, bracelets, or other jewlery which may get
caught in moving parts. Nonslip footware is recommended.
Wear protective hair covering to contain long hair.
WEAR PROPER APPAREL. Do not wear loose clothings,
DON'T OVERREACH. Keep proper footing and balance at
all times.
USE ONLY FLANGES (OR WASHERS) FURNISHED
WITH TOOL
KEEP CHILDREN AWAY. All visitors should be kept a
NEVER STAND ON TOOL
WARNING:
This product contains a chemical
known to the State of California to cause cancer. Some
dust created by power sanding and grinding as well as
contents from the machine may contain chemicals
known to the State of California to cause cancer, birth
defects or other reproductive harm.
ALWAYS USE SAFETY GLASSES TO MINIMIZE THE RISK OF
INJURY, ALWAYS USE PROPER EYE AND RESPIRATORY
PROTECTION: Everyday eyeglasses only have impact
resistance lenses and they are NOT safety glasses. (See
Decal at left.) Use appropriate respiratory face or dust mask.