Darex XPS-16 Operating Instructions - Manual (Page 42)

42
• After transfer is com-
plete, a screen will ap-
pear prompting you to
shut down machine and
restart.
ful. Turn the machine off and then on again and
run the Initialization program.
Figure 1 – Device Manager
Figure 3 – Advanced Settings
At this point downloadin g software was success-
Figure 2 – Port Settings
The computer interface to the XPS-16 is through an RS-232
The following steps should be followed for successful
1. Go to www.Sabrent.com and install the latest Windows
calibration CD supplied with the XPS-16). Do not plug
the unit into the PC while installing the driver.
3. Check in the Windows Device Manager under Ports
to see what COM port it assigned. It should show-up as
“Prolific USB-to-Serial Bridge” (see Figure 1).
SLoader needs the assignment to be ports 1 through 4.
4. If the assignment is higher than COM4, then you can
force it to a lower unused port using the Advanced … menu
from the Port Settings page. To access this menu, double
click on the port in Device Manager and select the Port
Settings tab (see Figure 2).
5. Click on the Advanced… button and set the
(see Figure 3).
COM Port Number to a lower value such as COM4
6. Close out of Device Manager and the Adaptor
should now operate like a standard Serial port.
correct assigned port.
7. Proceed with normal upload and download
activities. When SLoader is closed and the
released but it should re-acquire the same port
number when the Adaptor is re-attached.
Be sure to set the port number in SLoader to the
Adaptor removed from the PC, the port is
implementation.
2. Connect the USB to Serial Adaptor to a port on your PC.
(serial) port. Many PCs (especially notebooks) do not
to Serial Port Adaptor which emulates a Serial port through
a USB port. The USB to Serial Port adaptor is used with
SLoader on systems running Windows XP and Vista
including desktop and notebook hardware.
contain serial ports
.
Provided in your tool kit is a USB
driver for this item (driver is also located on the
Download Details
USB Communication Port Setup
Instructions Cont.
USB Communication Port Setup Instructions