Darex XPS-16 Operating Instructions - Manual (Page 41)

41
Download Screen Selector
Select this button for in system program-
ming and download capabilities. As up-
grades and optional custom point styles
become available, your machine is equipped to
receive these files from our factory to yours.
To utilize each of the following screens you will
need:
• PC located close to XPS-16
• Darex Sloader program must be used to trans-
fer software upgrades and download files.
Software Installation
• Insert the Darex XPS-16 Software Diskette in
the A: Drive
• Click on START and then click on RUN
• Type “A:\Install” and press the Enter key. The
program will automatically start
• To Run: Click START, PROGRAMS, DAREX and
then select DAREX CNC SOFTWARE LOADER
UI (User Interface) Update
UI Update Button – From PC to XPS-
16
• Make sure Serial Cable is connected from ma-
chine to PC.
• Upgrade your USER software by
touching the UI Update button.
UI Update Screen
Your current UI
software version
will be displayed in
this screen.
• Touch the “X” to cancel the update proc-
ess.
• To start UI Update, touch the “check” to
continue.
• The UI Update Pause screen
will flash on the screen.
• After a few seconds the screen
will go dark.
• On your PC, call up the Darex Software Loader
program by clicking on START, PROGRAMS,
DAREX and then select DAREX CNC SOFT-
WARE LOADER
• Click on “UI Update” tab.
Darex Software Loader Screen -
UI Update
• Click on “Serial Port Settings” drop-
down and select the correct COM
Port for your computer.
• Type in file name in
Browse field or click
on Browse button and
navigate to desired
file.
• Click on “Start Transfer”
• In the first line
of the Transfer
Status Result
Box, text will
appear displaying current status. The second
line will show progress of transfer.
Warning: Do not exit Software Loader Pro-
gram or power down machine until the
Transfer Status reads EXECUTING NEW
SOFTWARE.
Download Details
Download Details
•
nected from PC to XPS-16
Serial port converter with USB cable con-