IAI America RCP2W-GRLS - Manual (Page 37)

27
4. Installation Method
[RCP2-GRS]
Warning Caution
x
Some of the tapped holes used for installing the gripper are through holes. Therefore, never use long
screws exceeding the effective thread length. They may damage the mechanical or electrical parts
inside the gripper.
(Same on back side)
depth 6
Installation surface
Installation surface
depth 2.5
depth 7
depth 2.5
depth 2.5
dept
h 2
.5
Installation
surface
(Same on back side)
(Same on back
side)
Rear
2- ‡3
‡3