IAI America RCP2W-GRLS - Manual (Page 40)

30
4. Installation Method
[RCP2-GRHB]
Warning Caution
x
Some of the tapped holes used for installing the gripper are through holes. Therefore, never use long
screws exceeding the effective thread length. They may damage the mechanical or electrical parts
inside the gripper.
Installation surface
Installation surface
Installation surf
ace
depth 6 (same on the opposite side)
2-M6, depth 12 (same on the opposite side)
depth 6
long hole depth 6
(same on the opposite side)
long hol
e dep
th 6
4-M6, depth 10