IAI America RCP2W-GRLS - Manual (Page 43)

33
4. Installation Method
[RCP2-GR3SM]
Warning Caution
x
Some of the tapped holes used for installing the gripper are through holes. Therefore, never use long
screws exceeding the effective thread length. They may damage the mechanical or electrical parts
inside the gripper.
(Note) If the gripper is installed
from the rear side, remove
the blank plugs from the
tapped holes.
depth 3
depth ᜡ
Installa
tion
surfa
ce
Installa
tion
surfa
ce
Installa
tion
surfa
ce
(Same on back
side)
(Same on back
side)
(Same on back side)
Rear
(Use holes in the flange)
Detail view of A (2:1)
(Effective depth 7)
Blank plug (Set screw
M5 x 6)
depth 12
Installati
on
surface
‡
75
4- ‡5.5
‡
2- ‡3
‡
75