IAI America SSPA - Manual (Page 41)

6. Installation
33
Bolt seating surface
Seating surface Seating surface
Bolt
z ISB, ISPB: Medium type MXM/MXL/MXMX, Large type LXM/LXL/LXMX/LXUWX
The installation method is shown by a section view.
(Note) Threaded hole indicated with (*) in the figure above is not provided on the intermediate support type
(MXMX/LXMX/LXUWX).
[Through hole]
Installation bolt Tightening torque
M8 11.5 Nxm
[Threaded hole]
Tightening torque
Installation bolt
Bolt seating surface is steel Bolt seating surface is aluminum
M8 30.0 Nxm 11.5 Nxm
Warning: The threaded holes are not through, so exercise caution when selecting the bolt length.
Use of inappropriate bolts may damage the threaded holes or result in insufficient mounting
strength of the actuator, leading to a lower precision or unexpected accident.
Through hole Through hole
Threaded hole,
M8 depth 20 (*)
Base: Aluminum alloy
(A6063SS-T6 or
equivalent), with
alumite treatment
Threaded hole,
M8 depth 20 (*)
9
70
90
7 9
90
120
8