IAI America SSPA - Manual (Page 95)

14. Motor Replacement Procedures
87
Rear cover
Cable mounting
cover
(8) Installing the rear cover
[1] Slide the rear cover and insert it into the cable mounting cover.
[2] Tighten the four bolts to install the rear cover using an Allen wrench of 2.5 mm across flats for ISB and
ISPB-SXM/SXL, or 3 mm across flats for all other models.
[3] Tighten the screws with an Allen wrench of 2 mm across flats to attach the screws for the cable mounting
cover.
Rear cover
Cable mounting cover
Rear cover
Cable mounting cover