LEESON FHP Series Chassis Mount Variable Speed Drives - Manual (Page 44)

34 Installation
E2
E1 (COMMON)
S1
S2
D
S3
TB501
DIRECTION SWITCH
CLOSE TO REVERSE
Figure 21. Signal and Optional Switch Connections
DIRECTION (D) switch
Connect a single-pole, single-throw DIRECTION switch
between the (D) and COMMON (E1) terminals as shown in
Figure 21 below. Opening the switch will cause the motor
to rotate in the forward direction; closing the switch will
reverse motor rotation.
The drive will decelerate the motor to a stop, (at the DECEL
trimpot setting), before reversing, so there is no need to
wait for the motor to coast to a stop before changing
direction.