Teledyne LeCroy SierraFC M8-4 User Manual - Manual (Page 16)

Teledyne LeCroy Expandability
16 SierraFC M8‐4 Protocol Analyzer User Manual
Cables to Use
Connect from Hard Drives using SFP and a cable suitable for your setup.
Connect from Initiators using SFP and a cable suitable for your setup.
Figure 1.6: Analyzer Connections
Expandability
You can expand by:
 Cascading with CATC SYNC Expansion Cards
 Using the Power Expansion Card (optional)
You can remove expansion cards with two simple tools.
Cascading with CATC SYNC Expansion
You can use cascading of analyzer units for higher port count, by connecting the units
through the optional CATC SYNC Expansion Card on the analyzer back.
Connecting a SierraFC M8-4 and a Summit T3-16 via the CATC Sync Expansion Card
(ACC-EXP-002-X)
A SierraFC M8‐4 and a PCIe Summit T3‐16 are connected using their CATC Sync ports
which require an optional expansion card (ACC‐EXP‐002‐X).
Note:
Refer to relevant protocol analyzer user manual for instructions on how to install the expansion
board.