Teledyne LeCroy SierraFC M8-4 User Manual - Manual (Page 223)

SierraFC M8‐4 Protocol Analyzer User Manual 223
Quick Filtering Teledyne LeCroy
Filter Setup in Advanced Mode
Click the Advanced Mode button to set up filtering in the Advanced mode. Click on the Quick
Filter button to display the Quick Filtering dialog as shown in
Figure 3.51 on page 222 .
Note: The Filtering dialog display defaults to the last set option (Quick Filtering or Advanced Filter).
Figure 3.53: Filter Setup in Advanced Mode Dialog
You can select or deselect each of the items shown in the Filter Options window for
filtering, by checking or unchecking a corresponding check box. Items not in the current
sample are in shade.
NOTE 1: If you select a group, that also selects all child items.
NOTE 2: Only packets captured at run time are available for selection for filtering.