Teledyne LeCroy SierraFC M8-4 User Manual - Manual (Page 40)

Teledyne LeCroy Easy Mode (Pre‐Defined Setups)
40 SierraFC M8‐4 Protocol Analyzer User Manual
Figure 2.9: Analyzer Trace Capture Display
For details about the results display, see “Display Manipulation” on page 175 and see
“Viewer Configuration” on page 235 .
Patterns and Data Capture Setup
You can refine data capture by choosing Pattern and then selecting specific patterns for
capture. Additionally, you can define a different set of patterns to capture after trigger.
To define specific patterns for capture, click the Pattern button to display the Capture tab
for Pattern (see
Figure 2.10 on page 41 ). You can drag and drop patterns from the
Patterns Library pane into the Active Pane. You can select the pattern and use the Add
and Remove arrows to move patterns between the Patterns Library and the Active pane.
You can also copy and sort patterns.