Teledyne LeCroy SierraFC M8-4 User Manual - Manual (Page 48)

Teledyne LeCroy Easy Mode (Pre‐Defined Setups)
48 SierraFC M8‐4 Protocol Analyzer User Manual
FCP Patterns
FCP SCSI Command
Double‐click FCP SCSI Command in the Pattern window to open the Add
FCP SCSI Command Pattern dialog.
Figure 2.17: FCP SCSI Command Pattern Dialog
The format can be Binary or Hexadecimal.
If you select Any SCSI Command, the Command Type can only be Any Command. Click
the down arrow next to the CDB Type dropdown list, scroll the list to choose a CDB Type,
and click OK. The Any option allows specifying any vendor‐specific or other command.
If you select MMC‐6, SBC‐3, SMC‐3, SPC‐4, SSC‐2, OSD‐2, or ADC‐3, click the down arrow
next to the Command Type dropdown list, scroll the list to choose a Command Type, and
click OK.
Hover over commands to display tooltips