Teledyne LeCroy SierraFC M8-4 User Manual - Manual (Page 302)

Teledyne LeCroy Scenario Examples
302 SierraFC M8‐4 Protocol Analyzer User Manual
12. In the State 0 area, click the link <Click here to add an event>.
Figure 4.25: Example 2: Adding an Event for State 0
The Event Properties dialog box appears.
13. In the Event Properties dialog box, select FCP SCSI Command under FCP as the
Event. Select the SBC‐3 radio button and select Read (10) 0x28 from the Command
Type drop‐down menu.
14. Click OK to close the Event Properties dialog box, see the following screen capture.