Setup and measurement dialog, Aorm software package – Teledyne LeCroy AORM - Advanced Optical Recording Measurements User Manual
Page 11
Advertising
![background image](/manuals/353661/11/background.png)
AORM Software Package
923133 Rev A
ISSUED:
June 2013
9
SETUP AND MEASUREMENT DIALOG
The “AORM Measurements” dialog is accessed from the menu bar’s Analysis menu. AORM is
supplied with X-Stream software version 4.2 and later. This highly interactive dialog allows you to
set up and configure the clock and data sources, select a measurement type, and analyze the
waveform, including statistics on parametric measurements:
Advertising