Teledyne LeCroy AORM - Advanced Optical Recording Measurements - Manual (Page 28)

26
ISSUED: June 2013 923133 Rev A
Configuration Menus
The menus described on the following pages show how to configure any parameter.
Display the AORM dialog by touching Analysis in the menu
bar at the top of the screen and selecting AORM
Measurements…
from the drop-down menu.
Touch inside the View field and select a graph display from
the pop-up menu.
Touch inside the Show field and select a display mode. A
default group of parameters is automatically displayed when
Parameter
is selected. In addition, if Show Statistics is
checked, standard statistics (mean, min, max, sdev, num)
are also displayed.
When nT Table is selected, a default list of nT is displayed: