Setting levels – Teledyne LeCroy AORM - Advanced Optical Recording Measurements User Manual
Page 30
Advertising
![background image](/manuals/353661/30/background.png)
28
ISSUED:
June 2013
923133 Rev A
Setting Levels
To identify pits or spaces, thresholds and hysteresis are set.
Touch inside the Data Source field and select
a signal source.
Check Use Equalizer to apply a filter to the
Data Source.
To set up the equalizer, touch the Equalizer
and PLL
tab.
Touch inside the Data Slope field and select
an edge from the pop-up menu.
Advertising