Displaying trends – Teledyne LeCroy AORM - Advanced Optical Recording Measurements User Manual
Page 22
Advertising
20
ISSUED:
June 2013
923133 Rev A
DISPLAYING TRENDS
The Trend function for processing waveforms creates a graph of successive waveform parameter
values. It provides useful visual information on waveform parameter variation. Used together with
other scope features, it allows you to graph certain parameters compared to others.
To Configure a Trend:
1. From the menu bar select Math, then Math Setup… from the drop-down menu.
2. Touch
an
Fx
tab that is not currently assigned a math function (i.e., Zoom function by
default).
3. Touch
inside
the
Source1
field and select a source waveform from the pop-up menu.
Advertising