Vanguard DigiTMR - Manual (Page 30)

DIGITMR USER’S MANUAL REV 3
25
e. The following screen will be displayed:
Press the
[1]
key (Internal Trigger) to select the internal trigger.
f. The following screen will be displayed:
Press the [1] key (OPEN) to select the OPEN timing operation.
g. The following screen will be displayed:
Press and hold down the [ARM] switch, and then press the [START] key. Continue to
hold down the
[ARM]
switch.
h. The following screen will be displayed during testing:
Continue to hold down the [ARM] switch until the test is completed.
i. Once the test is completed, you will be returned to the “START-UP” menu.
Test in Progress
Hold “ARM” until
test complete.
(Up to 25 seconds)
OPEN TIMING
Hold “ARM” switch,
then “START”.
“STOP” to ABORT
TIMING MODE
1. OPEN 2. CLOSE
3. O-C 4. C-O
5. O-C-O
TRIGGER MODE:
1. Internal Trigger
2. External Trigger