Vanguard DigiTMR - Manual (Page 60)

DIGITMR USER’S MANUAL REV 3
55
j. The following screen will be displayed
Type the operator name using the alpha-numeric keypad, and then press the
[ENTER]
key.
k. The shot description information will be saved, and you will be returned to the “START-
UP” menu.
NOTE
Once the test record description is entered and saved, it will be stored in non-
volatile memory (even if the unit’s power is turned off) and will apply to all
new test records.
Enter OPERATOR name:
_
UP/DOWN TO POSITION
“ENTER” TO CONTINUE