Vanguard DigiTMR User Manual
Page 48
DIGITMR USER’S MANUAL
REV 3
43
3.8
Working with Timing Shots
3.8.1. Saving Timing Shots in the DigiTMR’s EEPROM
After performing a test, the test shot can be saved in the DigiTMR’s EEPROM by using the steps
below:
a. Start from the “START-UP” menu:
Press the
[3]
key (SET-UP).
b. The following screen will be displayed:
Press the
[3]
key (SAVE / RESTORE).
c. The following screen will be displayed:
Press the
[1]
key (SAVE SHOT).
d. The following screen will be displayed:
Press the
[ENTER]
key to confirm saving the shot.
e. The following screen will be displayed while the test shot is being saved:
SAVE IN PROGRESS
PLEASE WAIT
SAVE SHOT # 0001
TEST: OPEN
DATE: 04/21/09 08:32
“ENTER” TO PROCEED
1. SAVE SHOT
2. RESTORE SHOT
3. SHOT DIRECTORY
4. ERASE SHOT
1. ANALYSIS POINTS
2. MEASUREMENT UNITS
3. SAVE / RESTORE
4. NEXT PAGE
1. TIME BRKR 04/17/09
2. GET RSLT 10:49:23
3. SET-UP
4. DIAGNOSTICS