Vanguard DigiTMR - Manual (Page 70)

DIGITMR USER’S MANUAL REV 3
65
NOTE
If a rotary encoder (transducer) is used, the correct “distance/degree”
value must be entered before timing the circuit breaker.
Press the
[1]
key (ENGLISH (In./deg)) for English measurement units. The
following screen will be displayed:
Press the
[CLEAR]
key, and then type the desired value using the
numeric key pad. Press the
[ENTER]
key, and you will be returned to
the “START-UP” menu.
Press the
[2]
key (METRIC (MM/deg)) for Metric measurement units. The
following screen will be displayed
Press the [CLEAR] key, and then type the desired value using the
numeric key pad. Press the
[ENTER]
key, and you will be returned to
the “START-UP” menu.
MM/DEGREE
47.65 MM/Deg
INCHES/DEGREE
5.813 In/Deg