ZOLL Propaq MD Rev A - Manual (Page 126)

C HAPTER 10 M ONITORING CO2
10-4 www.zoll.com 9650-0805-01 Rev. A
Connecting the CO
2
Sampling Lines
To connect the FilterLine or Smart CapnoLine:
1. Slide open the Propaq MD unit’s CO
2
inlet port cover.
2. Put the fitting at the end of the sidestream tubing over the CO
2
inlet port connector.
3. Turn the fitting clockwise to tighten.
Figure 10-1 Connecting the Sampling Line Connector to the CO
2
Inlet Port