ZOLL Propaq MD Rev A - Manual (Page 161)

12-Lead Print and Display Options
9650-0805-01 Rev. A Propaq MD Operator’s Guide 13-11
Specifying the 12-Lead Print Format
This option allows you to specify the print format for the 12-lead waveform traces: 3 x 4
(the default) or 2 x 6.
Printing 10 Seconds of the Lead ll Waveform Trace
This option allows you to specify that the unit print 10 seconds of the Lead ll waveform trace
after printing a 12-Lead snapshot.
Specifying the 12-Lead Frequency Response
This option allows you to specify the frequency response of the 12-lead waveform display.
You can specify the following trace display ranges:
Display Type Frequency Response
Diagnostic 0.05 to 150 Hz
Filtered Diagnostic 0.25 to 40 Hz