Responding to active alarms -- silencing the alarm – ZOLL Propaq MD Rev A User Manual
Page 72
C
HAPTER
5 A
LARMS
5-4
www.zoll.com
9650-0805-01 Rev. A
In the following example, an equipment alert message indicates that the SpO
2
sensor has
become unattached (
SpO2 Check Sensor
) from the unit:
Responding to Active Alarms -- Silencing the Alarm
When a patient alarm is triggered and the alarm tone sounds
1. Check the patient and provide appropriate care.
2.
Press the Alarm Silence/Reset button (
)on the Propaq MD unit’s front panel to silence the
alarm briefly (90 seconds).
3.
After caring for the patient, check that the appropriate alarms are set (for more information
about setting and enabling alarms, see appropriate monitoring chapters later in this manual).
Note:
Pressing
suspends the alarm tone for all active alarms. If the patient’s vital signs
measurements trigger another, different alarm, the patient alarm tone will sound, even
if the first alarm silence period hasn’t expired.
03/23/2009 12:34:56
Adult
00:17:43
I, II,
III...
IBP
12
CO2
Analyze
1 cm/mV
II
HR bpm
80
121
79
(96)
NIBP mmHg
38
12
BR
CO2 mmHg SpO2 %
Check
Sensor
T1 ºF
98.6
SpO2 Check Sensor