Yokogawa AXFA14G/C - Manual (Page 45)

IM 01E20F02-01E 8-1
8. PARAMETER LISTS
8. PARAMETER LISTS
Note: The Write Mode column contains the modes in which each parameter is write enabled.
O/S:
Write enabled in O/S mode.
MAN: Write enabled in Man mode and O/S mode.
AUTO: Write enabled in Auto mode, Man mode, and O/S mode.
8.1 Resource Block
T0801-1.EPS
Write
Mode
Explanation
Factory
Default
Relative
Index
Parameter Name Index
Information on this block such as Block Tag, DD Revision,
Execution Time etc.
The revision level of the static data associated with the resource
block. The revision value is incremented each time a static
parameter value in this block is changed.
The user description of the intended application of the block.
The strategy field can be used to identify grouping of blocks.
This data is not checked or processed by the block.
The identification number of the plant unit. This information may
be used in the host for sorting alarm, etc.
The actual, target, permitted, and normal modes of the block.
This parameter reflects the error status associated with the
hardware or software components associated with a block.
It is a bit string, so that multiple errors may be shown.
State of the resource block state machine.
Read/write test parameter-used only for conformance testing
and simulation.
String identifying the tag of the resource which contains the
Device Description for this resource.
Manufacturer identification number-used by an interface device
to locate the DD for the resource.
Manufacturer's model number associated with the resource-used
by interface devices to locate the DD file for the resource.
Manufacturer revision number associated with the resource-used
by an interface device to locate the DD file for the resource.
Revision of the DD associated with the resource-used by an
interface device to locate the DD file for the resource.
Options for controlling access of host computer and local control
panels to operating, tuning and alarm parameters of the block.
The types of hardware available as channel numbers.
bit0: Scalar input
bit1: Scalar output
bit2: Discrete input
bit3: Discrete output
Allows a manual restart to be initiated. Several degrees of
restart are possible. They are 1:Run, 2: Restart resource,
3:Restart with initial value specified in FF functional spec. (*1),
and 4: Restart processor.
*1: FF-891 Foundation
TM Specification Function Block
Application Process Part 2.
Used to show supported resource block options.
0 1000 Block Header TAG="RS" O/S
1 1001 ST_REV 0 -
2 1002 TAG_DESC Spaces Auto
3 1003 STRATEGY 1 Auto
4 1004 ALERT_KEY 1 Auto
5 1005 MODE_BLK Auto Auto
6 1006 BLOCK_ERR 0 -
7 1007 RS_STATE - -
8 1008 TEST_RW 0 Auto
13 1013 DD_REV 1 -
14 1014 GRANT_DENY 0x00 Auto
15 1015 HARD_TYPES -
16 1016 RESTART 1 Auto
17 1017 FEATURES 0x000a -
9 1009 DD_RESOURCE Spaces -
10 1010 MANUFAC_ID 0x594543 -
11 1011 DEV_TYPE 0x000b -
12 1012 DEV_REV -