Yokogawa AXFA14G/C - Manual (Page 75)

IM 01E20F02-01E A-16
APPENDIX 2. INTEGRATOR (IT) BLOCK
TA0206-2.EPS
CLOCK_PER 86400.0[sec] Specify the period at which a periodic reset is made.
PRE_TRIP 100000.0 Set an allowance applied before an integrated value exceeds the setpoint.
N_RESET 0.0 Indicates the number of resets in the range of 0 to 999999.
PCT_INCL 0.0[%]
0.0[%]
0.0[%]
The ratio of "the integrated values of the absolute values of the increments whose status is
Good" to the "integrated values of the absolute values of the increments irrelevant to the
status" (Equation)
GOOD_LIM
The threshold value of the ratio of "the integrated values of the increments whose
status is Good" to all integrated values in which the status of OUT is "Good"
UNCERT_LIM
The threshold value of the ratio of "the integrated values of the increments whose
status is Good" to all the integrated values in which the status of OUT is "Uncertain"
OP_CMD_INT 0
0.0
Operator command that resets integrated values
OUTAGE_LIM
Maximum time for which values can be retained in the event of power failure.
It does not effect the block operation.
RESET_CONFIRM 0
Reset confirmation input, which is enabled when the Confirm reset option of
INTEG_OPTS is chosen
UPDATE_EVT Indicates event information if an update event occurs.
BLOCK_ALM
1
0
0
0
1
1
1
0
0
0
Indicates alarm information if a block alarm occurs.
30
31
32
33
34
35
36
37
38
39
40
41 ACCUM_TOTAL 0.0 Accumulated integrated values (no extension parameter is reset)
4
4
4 4
4 4
4
4
1 1
4
2 2
4
Index
Parameter
Name
Initial
Value Write
Mode
Definition
1 2 3 4
View
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto