Yokogawa AXFA14G/C - Manual (Page 8)

IM 01E20F02-01E 1-3
1. INTRODUCTION
1.2 Warranty
• The warranty shall cover the period noted on the
quotation presented to the purchaser at the time of
purchase. Problems occurring during the warranty
period shall basically be repaired free of charge.
• If any problems are experienced with this instru-
ment, the customer should contact the Yokogawa
representative from which this instrument was
purchased or the nearest Yokogawa office.
• If a problem arises with this instrument, please
inform us of the nature of the problem and the
circumstances under which it developed, including
the model specification and serial number. Any
diagrams, data and other information you can
include in your communication will also be helpful.
• The party responsible for the cost of fixing the
problem shall be determined by Yokogawa follow-
ing an investigation conducted by Yokogawa.
• The purchaser shall bear the responsibility for repair
costs, even during the warranty period, if the
malfunction is due to:
- Improper and/or inadequate maintenance by the
purchaser.
- Malfunction or damage due to a failure to handle,
use, or store the instrument in accordance with the
design specifications.
- Use of the product in question in a location not
conforming to the standards specified by
Yokogawa, or due to improper maintenance of the
installation location.
- Failure or damage due to modification or repair by
any party except Yokogawa or an approved
representative of Yokogawa.
- Malfunction or damage from improper relocation
of the product in question after delivery.
- Reason of force majeure such as fires, earthquakes,
storms/floods, thunder/lightening, or other natural
disasters, or disturbances, riots, warfare, or
radioactive contamination.
• Trademarks:
ADMAG, AXF and ADMAG AXF are registered
trademarks of Yokogawa Electric Corporation.
Company names and product name used in this
material are registered trademarks or trademarks of
their respective owners.
1.3 Combination Remote
Flowtubes
IMPORTANT
• The AXFA14 Magnetic Flowmeter Converter
should be used in combination with the follow-
ing remote flowtubes:
AXF002
ٗ-P to AXF400ٗ-P
Other flowtubes (size 500 to 2600 mm) cannot
be combined with the AXFA14 converter.
CAUTION
In case of the explosion proof type, please see
the manual IM 01E20D01-01E. The construction
of the instrument, installation, external wiring,
maintenance, and repair are strictly restricted,
and non-observance or negligence of these
restriction would result dangerous condition.