Yokogawa Wireless Temperature Transmitter YTA510 - Manual (Page 5)

IM 01C50T01-01E 1-1
1. INTRODUCTION
1. INTRODUCTION
Thank you for purchasing the YTA series Temperature
Transmitter.
The YTA series Temperature Transmitters are correctly
calibrated at the factory before shipment. To ensure
correct and efficient use of the instrument, please read
this manual thoroughly and fully understand how to
operate the instrument before operating it.
This manual describes that communication function of
YTA series conforms to HART protocol and offers
instruction for setting parameters for models YTA110,
YTA310 and YTA320 Temperature Transmitters via
HART 275 handheld terminal. In regards to the
installation, wiring and maintenance of the YTA series
Temperature Transmitters, please refer to the Instruc-
tion Manual “YTA series Temperature Transmitters
Hardware Manual IM 01C50B01-01E.”
᭿
Regarding This Manual
• This manual should be passed on to the end user.
• The contents of this manual are subject to change
without prior notice.
• All rights reserved. No part of this manual may be
reproduced in any form without Yokogawa’s written
permission.
• Yokogawa makes no warranty of any kind with
regard to this manual, including, but not limited to,
implied warranty of merchantability and fitness for a
particular purpose.
• If any question arises or errors are found, or if any
information is missing from this manual, please
inform the nearest Yokogawa sales office.
• The specifications covered by this manual are
limited to those for the standard type under the
specified model number break-down and do not
cover custom-made instrument.
• Please note that changes in the specifications,
construction, or component parts of the instrument
may not immediately be reflected in this manual at
the time of change, provided that postponement of
revisions will not cause difficulty to the user from a
functional or performance standpoint.
• The following safety symbol marks are used in this
Manual:
WARNING
Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious
injury.
CAUTION
Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate
injury. It may also be used to alert against
unsafe practices.
IMPORTANT
Indicates that operating the hardware or software
in this manner may damage it or lead to system
failure.
NOTE
Draws attention to information essential for
understanding the operation and features.