Yokogawa GC1000 Mark II Process Gas Chromatograph - Manual (Page 42)

<3. Analyzer Operation Window>
3-13
IM 11B03G03-03E
n Types and Change of the Status
l Types of the Status
There are three types of the status, as shown below. A currently active status is represented by a
depressed button.
Status Button Description
Process Performs an automatic analysis. Allows the selection of
the measuring status.
Manual Performs a manual analysis. Allows the change status of
valve/detector/theperature controller only in this status.
Lab Performs a laboratory analysis.
l Changing the Status
To change the status, click on the button of the status you want to select. Depending on the
current situation, operable buttons, which are indicated as darkened buttons, are different.
n Types and Change of the Operation Mode
l Types of the Operation Mode and Indications of the Current Status
There are three types of the operation mode, as shown below.
Mode Button Description
Run Executes analyzer operation.
Pause Pauses operation.
Stop Stops operation.
Each state of the button indicates the current status of the operation mode.
Example: Run mode
Status of button Meaning
The Run mode is being executed.
Can be changed to the Run mode.
The Run mode is reserved.
Cannot be change to the Run mode.
l Changing the Operation Mode
To change the operation mode, click on the button of the operation mode you want to select.
Depending on the current situation, operable buttons, which are indicated as darkened buttons,
are different.
There is a [Cancel] command button
which is only used to cancel the reserved operation
mode.
4th Edition : Mar. 21, 2012-00