Yokogawa GC1000 Mark II Process Gas Chromatograph - Manual (Page 47)

<3. Analyzer Operation Window>
3-18
IM 11B03G03-03E
n Changing the Range
(1) Click on the [Range Select] command button .
(2) The Range Select dialog box pops up.
F0327.ai
Specify the stream number, peak number, and range number you want to change.
The information of the current state is displayed.
(3) Click on the [Exec.] button. A confirmation dialog box pops up.
F0328.ai
(4) Click on the [Yes] button.
(5) A message appears to inform you that the data has been changed successfully.
F0329.ai
(6) Click on the [OK] button to finish.
4th Edition : Mar. 21, 2012-00