Yokogawa GC1000 Mark II Process Gas Chromatograph - Manual (Page 73)

<5. Alarm Windows>
5-6
IM 11B03G03-03E
5.3 Deleting the Records of Alarm History
The displayed contents of the Alarm History window can be cleared to restart recording alarms.
NOTE
The contents of the Alarm History window can be erased only at user level B or C.
n Deleting Historical Alarms
l Procedure
In the Alarm Status or Alarm History window, click on the [Clear History] command in the [View]
menu. The contents of the Alarm History window are erased.
5.4 Creating a User Alarm Description
For user-defined alarms and alarms raised by an external contact (DI) (those set in the Alarm
Setting window on the LCD panel), the user can edit the contents of the alarms that are shown in
the Alarm Detail Description window.
NOTE
Messages for user-defined alarm must be defined here in the Maintenance Terminal, although
they can be defined from the LCD panel of the analyzer itself. User-defined alarms set in the
analyzer and in the Maintenance Terminal are independent of each other.
n Defined Information
l User Alarm Description window
Use this window to define the description of a user alarm.
F0510.ai
l Defined Items
The following table lists the items which can be defined in the User Alarm Description window.
4th Edition : Mar. 21, 2012-00